The number you provided from the lens, SAEAP2 16 DOT states that the lens is compliant with DOT regulations, but in most cases it won't help us identify the lens. However, we've gotten enough inquiries about this lens that I can identify the replacement as # A32AB which is the replacement lens for the Optronics # MC32AB lamp. You can confirm this by looking at the housing of the existing lamp which should have the part number printed on it somewhere. The lens measures 4" L x 2" W x 1/2" H. view full answer...
We offer a replacement metal roof vent cover that fits the standard 14 x 14-inch roof vents that are typically found on RVs. Ventline part # BV0534-00 is a plain metal finish flat lid with a continuous type hinge. This is the only metal lid we offer at this time. I linked a photo showing the hinge since this is an important aspect to its fit on the vent.
If your vent uses a different style of hinge (all types appear on the other linked photo) you can refer to the linked page for all types... view full answer...
We can certainly point you in the right direction. Unfortunately, we do not have a way to cross reference a year make and model of camper to know exactly what bearing sizes you will need. If you can confirm the individual axle capacity that will help to narrow it down. The best way to know what bearing sizes you need is to pull a hub and remove the bearings. Each bearing will have a number stamped on the edge. If you are able to provide the inner and outer bearing numbers, we should be... view full answer...
We do have a propane gas detector you can use to replace your Atwood model 31013. The Atwood 31013 is no longer available, so it will not be a direct replacement. We have the:
-RV Propane Gas and Carbon Monoxide Detector # RS34FR for white, or the:
-RV Propane Gas and Carbon Monoxide Detector # RS54FR for black.
We also have the # RS44FR if you want it for detecting propane gas only.
All of these carbon monoxide detectors are flush mounted, measure 4-1/4" long, 2-5/8" wide, and 1/2"... view full answer...
I have attached options for the more commonly seen vent lids used on manual opening roof vents. This is rounded dome style by VentLine in white # BV0554-01, or in smoke # BV0554-03.
If you have not previously replaced a vent cover/lid I have attached a couple of useful how-to video. In addition I suggest consider installing an enclosed trailer roof cover such as the # CAM40431. These vent covers lets you keep your RV roof vent open at all times, letting in light and air while keeping... view full answer...
The LaSalle Bristol Cable-Actuated RV Waste Valve for Gray Water Tank - Spigot to Hub - 60" Cable # 34466N11AB60GM will allow you to remove the outer spigot and hub so you just use the cable and the valve.
You can alternatively use the Valterra Waste Valve Body w/ Flexible Cable for RV Gray Water Tank - 72" # TC172 which will give you a slightly longer cable if desired. view full answer...
Go To Results